SPECIFICATION

General
Device Type Switch - 48 Ports - Managed
Enclosure Type Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Authentication Method �IEEE 802.1X , Web-based authentication , MAC-based authentication , �Concurrent authentication modes
VLAN 4,096 VLANs
Compliant Standards Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)4 fixed 1000/10000 SFP+ ports
Network Features Jumbo frames, IEEE 802.3at PoE+, Pre-standard PoE support , Pre-standard PoE support , Choice of uplinks , SFP+ uplink models , 0GBASE-T uplink models , Auto-MDIX�, IPv6 host , Dual stack�(IPv4 and IPv6) , MLD snooping , �IPv6 ACL/QoS , IPv6 routing , 6in4 tunneling , Security, IEEE 802.1ad QinQ , IEEE 802.1v protocol VLANs , MAC-based VLAN, Rapid Per-VLAN Spanning Tree (RPVST+) , Hewlett Packard Enterprise switch meshing , GVRP and MVRP , VLAN support and tagging
Security Features Source-port filtering , RADIUS/TACACS+�, Secure Sockets Layer�(SSL)�, Port security�, MAC address lockout�, MAC address lockout�, Detection of malicious attacks�, Detection of malicious attacks�, Switch management logon security�, Secure management access�, ICMP throttling�, Identity-driven ACL�, STP BPDU port protection , Dynamic IP lockdown , DHCP protection�, Dynamic ARP protection�, STP Root Guard , Management Interface Wizard�, Security banner�, Switch CPU protection�, ACLs , Multiple authentication methods, IEEE 802.1X , Web-based authentication, MAC-based authentication , Concurrent authentication modes, Private VLAN
QoS Features Advanced classifier-based QoS, Layer 4 prioritization, Class of Service�(CoS), Bandwidth shaping, Port-based rate limiting, Classifier-based rate limiting, Reduced bandwidth, Remote monitoring (RMON), Extended RMON (XRMON), and sFlow v5, Traffic prioritization
Management & Monitoring Friendly port names , IEEE 802.1AB Link Layer Discovery Protocol (LLDP) , Command authorization , Uni-Directional Link Detection (UDLD) , Multiple configuration files , Dual flash images , Out-of-Band Ethernet management port , Comware-compatible CLI , Display and fundamental Comware CLI commands , Configuration Comware CLI commands, Zero-Touch ProVisioning (ZTP)
Routing Protocols Static IP routing�, OSPF�, Policy-based routing , Border Gateway Protocol�(BGP) , Routing Information Protocol (RIP),
First Hop Redundancy Virtual Router Redundancy Protocol (VRRP)
Flash Memory 4 GB
Jumbo Frame Support 10-Gigabit
MAC Address Table Size 65500 entries
Stacking Virtual
Max Units In A Stack 10 switches
Performance 176 Gbps , up to 130.9 Mpps
Power Over Ethernet (PoE) PoE+
PoE Budget 186 W
Ports 48 RJ-45 autosensing 10/100/1000 PoE+ ports
Processor HPE ProVision ASIC/ARM @ 350 MHz
RAM 2 GB
 
Dimensions & Weight
Depth 18.4 inches
Height �1.7 inches
Width 17.43 inches
Weight 7.64 kg
 
Environmental Parameters
Humidity Range Operating 15% to 95% @ 104�F (40�C), noncondensing
Humidity Range Storage 15% to 90% @ 149�F (65�C), noncondensing
Max Operating Temperature 131�F
Max Storage Temperature 158�F�
Min Operating Temperature 32�F
Min Storage Temperature - 40�F
 
Expansion / Connectivity
Manufacturer Warranty Limited Lifetime Warranty
 
Miscellaneous
Safety/Compliant Standards EN 60950/IEC 60950; UL 60950; CAN/CSA 22.2 No. 60950; EN 60825, FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
 
Power
Features Internal Rudundant Power Supply
Power Device Internal power supply
Power Redundancy 2 power supply slots
Voltage Required 100 - 120 / 200 - 240 VAC, rated
 
Software / System Requirements
Software Included HPE Comware CLI
 

TOP RECOMMENDED PRODUCTS